Is there anything more upsetting than discovering that the grout between your beautiful tiles is becoming a breeding ground for filth and grime, despite your best efforts to keep it clean?
One solution comes to mind, which involves crawling down on one’s hands and knees in an attempt to remove the stain. To make your grout look clean and shiny once more, it can be exhausting to have to sit and scrub hard between each tile in order to clean it.
So, how do you get the grout in your floors clean without having to suffer through a backbreaking scrubbing?
Oh, and did you guess what? You’ve hit the jackpot today! Because in this article you will discover the Mastermaid techniques of How to Clean Grout Floors Without Scrubbing.
Why Does Grout Become So Filthy?
Because grout is a very porous material and everything attaches to it too easily, especially in damp settings such as your bathroom and kitchen, it attracts dirt, mold, and mildew like a magnet. In a word, grout is a magnet for these types of contaminants.
Because dust and liquids are able to fully penetrate it and mix together, mud is created, and the grout loses its characteristic milky white hue as a result.
It is also very typical for dirty mop water to clog up the grout by combining even more dust with liquids. As a result, rather than making the floor squeaky clean, this just makes it worse by spreading and settling the water into the grout because it is the lowest section of the floor.
So What Are The Most Effective Ways To Clean Grout Floors Without Scrubbing?
It is important to keep in mind that without the assistance of expert move in cleaning services, there is no way to get the grout completely clean. With that being said, the following are a few of the most efficient and effective ways to clean floor grout with the least amount of scrubbing required.
1. Using Hydrogen Peroxide And Baking Soda
The combination of baking soda and peroxide is your best bet if you want to clean your grout in a way that is both risk-free and affordable. To complete the task, all you will need is some peroxide and baking soda, which you should already have in your kitchen.
The following are the components that make up the cleaning chemical:
1 liter of hydrogen peroxide
1 liter of sodium bicarbonate
The only thing that is required of you at this point is to combine these two components in a bowl. Next, you have the option of pouring the solution straight into your grout or putting it into a spray bottle and applying it that way. Keep the mixture at this temperature for approximately 10–15 minutes.
After that, you can begin cleaning the grout with a toothbrush or a smaller brush, depending on your preference. You won’t believe how simple it is to clean your grout with only a little bit of elbow grease and some disinfectant.
2. The Use Of Polyblend
Polyblend is a polymer-modified, cement-based, sanded grout that generates joints that are hard, dense, and resistant to shrinking, cracking, and wear. Polyblend is sold under the brand name Polyblend.
Polyblend is a substance that is used specifically to clean and whiten all different sorts of stains that are found in the grout. It is a good method for removing crusty and tenacious stains and filth. This substance poses a lower risk to both your skin and tiles than the powerful chemical agents that were discussed earlier; as a result, it is almost entirely safe to use.
To make use of Polyblend, all that is required is to thoroughly combine the chemical with water in a separate container, then dab a paintbrush into the resulting liquid and apply it along the grout lines. After allowing it to sit for around ten to fifteen minutes, take a toothbrush or another type of bristle brush and gently scrub the mixture to remove it from the grouts.
The only disadvantage of using Polyblend is that it requires additional work to clean the grouts because you need to get on your knees and paint the mixture along the grout lines. This is in contrast to the two methods described above, in which all you need to do is apply the cleaning substances and let them do their job.
3. Using A Powerful Chemical Agent, Such As Lysol Or Clorox Bleach.
The application of significantly more powerful cleaning solutions, such as Lysol or Clorox bleach, on your grout, constitutes the second approach for cleaning your grout without washing it.
This approach is really efficient and may almost ensure that you will have perfectly clean grout without actually washing it, but it does come with some drawbacks that must be dealt with first.
To start, there is the expense associated with the actual chemical agent. If you already have either of these chemicals in your bathroom, the cost issue is irrelevant to you at this point.
The second and arguably more significant reason is that employing this method is riskier than using baking soda since these chemicals are severe cleaners, both on you and your tiles. Baking soda is milder and cleaner than these chemicals are.
As a result, we don’t advise applying them very frequently. However, this is an excellent method for revitalizing bathroom tiles that have been ignored or that are troubled by stains that are difficult to remove and build up. When the dirt appears to have accumulated to the point that it would take hours to remove it, you may also clean the grout on your floor using this method. This can be done on occasion.
Conclusion
There you have it—white, spotless grout that you can use without putting your hands, back, knees, or surroundings at risk! There is nothing that can more quickly damage the appearance of clean tiles than unclean grout.
The layer between your spotless clean tiles will become whiter than a tablecloth in a heartbeat now that you know the Mastermaid techniques of How to Clean Grout Floors Without Scrubbing.
