Everyone is excited to dip in the pool to cool off as summer comes. However, ensure your pool is in good condition. It may not be noticeable, but over time, the pool’s surface can wear out and become unsafe for swimming.
Let us discuss the eight signs you should look for to determine if it’s time to resurface your pool.
Obvious Signs Your Pool Needs Resurfacing
Observe the following signs on your pool’s surface. The following signs indicate that your pool needs resurfacing to maintain its safety, appearance, and functionality.
Surface Cracks
Speaking of safety, ground movement, temperature changes, or chemical exposure cause cracks on the surface of your pool.
Small cracks are repairable with small amounts of fillers. However, larger ones may require overall pool resurfacing. If left unaddressed, cracks cause more extensive damage.
To counter this, consider Pebble Tec for resurfacing. It can cover and fill in cracks, creating a smooth and even finish. But it also has a slip-resistant texture!
In these intensive repairs, look for professionals. For example, look at the pebble tec Las Vegas website https://www.poolresurfacinglasvegas.com/ to ensure you get answers to your question and get high-quality results.
Water Loss
Once again, cracks or other pool surface damage can cause water loss in your pool.
If you notice a decrease in the water level, promptly address the issue to prevent further damage.
Water loss can increase water bills and cause more extensive damage to your pool system over time. Remember that the pool system is the most expensive. That’s why you must protect it at all costs.
Uneven Surface
Exposure to chemicals, sunlight, or other factors can cause an uneven surface in your pool. Run your hand over the pool surface to confirm that the surface is getting uneven.
An uneven pool surface can make cleaning difficult. It can create small pockets or areas where debris can collect and be hard to reach.
If left uncleaned, algae and other bacteria build-up, dangerous for swimmers and makes the pool unattractive.
Stubborn Stains
Minerals, chemicals, or algae can leave stubborn stains that are difficult to remove.
First, try regular cleaning to take off the stains. But if it persists, consider resurfacing right away.
Stubborn stains can make your pool look uninviting and unkempt. It will not appeal to swimmers and spoil your summertime madness.
Faded Finish
Sun’s UV rays and pool chemicals can cause the finish on your pool to fade over time. It can make your pool look dull, sad, and unsuitable for a party!
Resurfacing your pool can bring back its color or make it look new. Aside from aesthetics, you can enjoy the peace of mind of having a firm pool.
Chalky Build-up
Chalky build-up on your pool’s surface is another side effect of the sun’s UV and pool chemical use.
To observe, check if it has a dull, hazy, or cloudy look that often appears in specific areas.
Sometimes, it can feel rough or slightly grainy to the touch. And like stains, they can be challenging to remove with regular cleaning.
Peeling Finish
You might also notice a peeling finish after a time of chalky build-up.
Like any signs in this list, a pool peeling can make your pool look unappealing. The scraped-off finish can also cause cuts and scrapes to swimmers. Plus, it can get sucked up the filter and render pool system damage.
Aging Pool
Pools older than ten years can become unsafe and unattractive. Even if it looks still in tack, you must ensure its quality. An old pool will never tell you when it decides to give up and break.
Resurfacing can extend its life, improve its functionality, and increase the value of your property.
However, if you need clarification on the pool’s age, read the following section.
How To Tell The Age Of The Pool?
Suppose you don’t notice any of the signs above but still want to ensure the pool’s age. In that case, read the following methods:
Ask The Previous Owner
If you bought a house with a pool, you could ask the former owner how old the pool is. They might know when they installed it or when it was the last time they resurfaced it.
Check The Paperwork
Obtain a copy of your house plan to determine the pool’s age. Check with your local government office if you need help obtaining a copy. Also, contact a builder or contractor who can inspect the pool.
Look At The Pool Design
Your pool format can give you a good idea of how old it is.
Most pools built in the 1970s and 1980s have simple geometric shapes.
In contrast, more recent swimming pools tend to have more complicated designs. But it’s best to get a pro to check it.
Check For Wear And Tear
Older pools may show signs of wear and tear we discussed earlier. If you notice these signs, it could indicate that your pool is getting older and may need a fresh layer.
The Sure Way to Maintain a Safe and Beautiful Pool
Resurfacing your pool is an integral part of pool maintenance to ensure safety and extend the life of your pool.
If you notice any signs of wear and tear, it’s essential to call a professional pool resurfacing company. They can ensure that the job will last longer and will stay safe.
Also, reliable experts can assist you with the maintenance to keep the pool’s function at its prime.
Aside from resurfacing your pool, upgrade your pool area with pool deck overlays. It is cost-effective to enhance your pool area without expensive demolition and replacement.
Visit an expert’s website, like www.decorativeconcreteorlando.com, to explore the options available to transform your pool area with different colors, textures, and designs.
