Cabinets made of laminate are a common choice among homeowners because they are simple to maintain and continue to look great even after years of use. However, replacing entire cabinets can be pricey, so if you are looking for a way to update your kitchen or bathroom without spending a fortune, a laminate cabinet is a solution. Laminate cabinets are available in a wide variety of colours and styles.
It is possible to give your kitchen or bathroom a contemporary makeover without incurring the cost of completely replacing the cabinets by simply painting laminate panels and cabinets. Cabinets made of laminate are made of a hard plastic material that can be challenging to paint. However, if you prepare the surface properly and use the appropriate techniques, you can achieve a finish that looks like it was done by a professional.
Star Painter and Decorator Coventry has provided a detailed walkthrough of how to paint a laminate cabinet. Using this straightforward, effective method, you can give your house a modern and updated appearance. If you follow these detailed instructions, painting your cabinet will take only a few minutes!
Prepare the surface:
It is essential to thoroughly clean the laminate cabinet’s surface before beginning the painting process. In the process of painting, one of the most important steps is to prepare the surface. Thoroughly cleaning the laminate surface will ensure that the paint adheres properly and creates a smooth, even finish.
This will prevent chipping and peeling. It is possible to effectively remove dirt, grime, and grease from the surface using a degreaser or a mixture of water and a gentle detergent. Before moving on to the next step, you must make sure to give the surface a careful rinsing and then allow it to dry completely.
When working with any chemical, it is essential to remember that it is best to do so in an area that has adequate ventilation and to protect oneself by wearing gloves, a mask, and eye protection.
Sand the surface:
Sand the laminate cabinet’s surface using fine grit sandpaper, taking care not to scratch it. You can make the surface rough enough for the paint to adhere better to it by giving it a light sanding with sandpaper with fine grit and then painting over it.
It is essential to sand in the direction of the wood grain when performing the sanding process, as this will help to reduce the visibility of any scratches or marks that may have been made on the surface.
After you are finished sanding, you should use a damp cloth to remove any dust that may have accumulated. Before applying the primer or paint, this should be done so that the surface is thoroughly clean and free of debris particles.
Sanding is an important step; you should do it lightly because too much sanding can cause damage, weaken the surface, or change the shape of the cabinet.
Apply a deglosser or liquid sandpaper:
Because of their glossy finish, laminate cabinets can be challenging to paint despite being long-lasting and straightforward to maintain and clean. This gloss can make it difficult for paint to adhere correctly, resulting in an uneven finish that may peel. It is possible to combat this issue by using a deglosser or liquid sandpaper to dull the surface of the cabinet. This will produce a rough surface that the paint can grip onto.
When utilising a deglosser or liquid sandpaper, it is critical to pay close attention to the instructions provided on the product label. Because of this, the product will be utilised appropriately and in the appropriate quantity on your part. Make sure that you wait until the deglosser or the liquid sandpaper has completely dried before moving on to the next step.
When working with a deglosser, it is essential to remember that the product is typically a chemical solution; consequently, it is prudent to wear protective gear like gloves and to do so in an area with adequate ventilation. Before applying the product to the cabinet, it is always recommended to test it in a small area that some people will only see to see how it performs.
Prime the surface:
Prime the surface of the laminate cabinets before applying paint. After the surface of the laminate cabinets has been properly prepared with a deglosser or liquid sandpaper, it is crucial to prime the surface.
When searching for a primer for laminate surfaces, it is essential to select an oil-based primer of a high quality that was developed specifically for use with laminate. Primers of this type are designed to work particularly well with laminate surfaces and contribute to forming a sturdy bond between the laminate surface and the primer itself.
To ensure that the primer is applied evenly and that the entire surface is covered, the best application method is to use a paint brush or roller. Take your time and pay particular attention to the edges and corners of the cabinets, as it may be difficult to cover these areas if they are not adequately protected completely.
Paint the surface:
After the primer has been allowed to dry and set for some time, it is time to apply the paint. When selecting the colour for laminate surfaces, it is recommended that you go with an oil-based paint of high quality that is designed specifically for use on laminate surfaces. These paints have been formulated to adhere well to laminate surfaces and provide a finish that will remain on those surfaces for an extended period.
Paint with an oil base is typically used on laminated surfaces because of its durability. It is essential to select a paint that, when applied to this kind of surface, will produce the desired results. When attempting a painting of this kind, it is necessary to use an oil-based medium that has been developed specifically for the purpose at hand.
Applying at least two coats of paint is recommended, and waiting for the initial coat to dry completely before beginning the second application. Because of this, it will be much simpler to ensure that the paint is applied evenly and that the finish is smooth.
Finish with a clear coat:
After the paint has been completely dry, it is necessary to finish the project by applying a coat of clear polyurethane to the surface. This step must be completed. This will help protect the freshly painted surface from scratches and other types of damage and give the surface a smooth and polished appearance that is more appropriate for a professional setting. If you do this, you can save time and money in the long run.
Wrapping Up
Painting laminate cabinets is an easy and inexpensive way to update the appearance of your kitchen or bathroom without breaking the bank. The correct preparation, as well as the application of the appropriate materials, are essential if you want to achieve a finish that looks professional.
You can ensure that your newly painted cabinets will be smooth, long-lasting, and simple to clean if you follow the steps of cleaning the surface, using a deglosser or liquid sandpaper, applying a high-quality, oil-based primer, using high-quality, oil-based paint, and finishing with a clear coat of polyurethane.
If you follow these steps, you can paint your cabinets successfully. The process may take a lot of time, but the result will be well worth it and prevent you from having to pay the cost of completely replacing your cabinets.
About the Author
Star Painting and Decorating Coventry
Address: 175 Leamington Road, Coventry, CV3 6GT, United Kingdom
Phone: +44 7479277887
